Machine Serial Number Registry
|
Serial Number: |
001922 |
|
Machine Type: |
Mill |
|
Machine Description: |
8525 #7B&S spindle, |
|
Owner: |
Scott Anzivino |
|
Manufacture Date: |
1959 |
|
Notes: |
Source=Owner's submission. Owner's notes: 3 axis DRO plus Quill DRO, tach, & electronic edge finder,
X axis power feed,
Completely rebuilt 2024.
All new bearings, felts, belts, oil seal, X & Y feed nuts (NOS), paint etc.
Original bearings were all Fafnir except for lower two spindle bearings that were New Departure bearings.
Head quill feed gear sets are all steel,
Spindle tension adj - 1 screw only.
Spindle drive plate is steel.
Spindle uses knurled nut (w/ 2 sets screw) with flanged/captured draw bar. Auto ejects collets.
3/4 hp Dayton motor,
Original Furnas Fwd/Rev drum switch and original AB Manual Starter Push Button Switch (609AAWA)
Fabricated 5" riser to utilize ER32 collets, dividing head & rotary table.
When stripping paint - very very little filler was found anywhere.
Original wood floor inside cabinet and original wood collet rack on door.
Acquired 1994, auction from H.S. Industrial Arts program. Believed school acquired from gov't auction - brass tag on column is stamped US Property Picatinny Arsenal w/ a property book #. When stripping the column and after removal of the Clausing badges (aluminum) there were remnants of cast in "JOHANSSON" Also - brass tag on front pulley cover is the Black/Red version - Atlas/Clausing. |
|
|
|