Photo Index - Red Star Products, Inc. - Multiplex 40A

Machinery Photo Index

Manufactured/Badged by:
Red Star Products, Inc.
Norwalk, OH; Cleveland, OH

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Radial Arm Saw
Machine Size:	12/14"
Submitted By:	Mike Burt

Machine Specifications
Description/Model:	Multiplex 40A
Date of Manufacturer:	Pre -1950
Serial Number:	40A-A 9585W
Last Updated	7/28/2008 12:08:18 PM

Comments:

Found this on CL while scanning through out state locations.

Saw was purchased from second owner who purchased it from original owner in a package deal. The 2nd owner didn't want the RAS so it ended up on CL.

Saw is in excellent condition with only a couple on minor missing parts and a dab of rust on the column where some water appears to have been splashed on it. The cord grommets were slopped with epoxy by the original owner. The cords need replacing. The saw is prominently labeled 220 VOLTS most likely because the original owner had rigged it up with your standard three prong household plug - with the ground prong cut off to boot - to most likely work in the gerry-rigged power cord set-up he used. First thing I did was install the 30A twist-lok plug.

Photo 1:

Comments: Missing front leaf guard original screw. Supplied with piece of copper p trap for an exhaust port
Source: my photo

Direct Link
IMG Code

Photo 2:

Comments: Missing Splitter/anti-kickback rod locking thumbscrew and the knob for the turret lock. There's that 220 VOLTS label
Source: my photo

Direct Link
IMG Code

Photo 3:

Comments: Plates in relatively good shape
Source: my photo

Direct Link
IMG Code