|
|
|
Seller assumes all responsibility for this listing.
Nothing works like the old stuff, and this is a rare pair of rock solid, american-made vintage shop machinery. These tools were originally purchased by my wife’s grandfather sometime around 1953 or 1954. They were stored for some time after he could no longer use them, and then came to us after his death. I refurbished the table saw and got in great working order. I have used the table saw regularly and maintained it for the last 9 years. I had no use to the jointer, so I stored it and the motor. Although it works fine, it has not been used and will need pulley wheels, a belt and likely a new blade to get up and usable.
Would be great for a small garage shop, a school woodshop or anyone interested in vintage tools from 70 years ago!
NOTE: These are both VERY heavy. You’ll need two people to move the table saw.
Table saw details:
Delta-Rockwell Homecraft 8” table saw model #34-500. Serial number AC3158, likely from around 1953/1954.
This table saw has been owned by one family since the original purchase. Lovingly cared for and used. Cast iron top is solid, no cracks, dead flat and free of rust. Rip fence is square to the blade and everything works perfectly.
Overall dimensions - 17 1/2" high by 37 1/2" wide by 22" deep
Diameter of Arbor - 5/8"
Diameter of Saw - 8"
Maximum Thickness of Cut - 2 1/4"
Maximum Thickness of Cut at 45 Degrees - 1-9/16"
Maximum Width of Dado Cut - 13/16"
Blade Tilt - 45 Degrees
Table in front of blade on capacity cut - 11-5/8"
Maximum rip to right of blade - 24"
Table working height on steel stand - 34 1/2"
Table Size - 22" deep by 15" wide
Table Size with extensions - 22" deep by 25" wide
Fence - 24 7/8" long by 2" high
Speed - 3850 r.p.m. with Standard 1725 motor
What’s included:
Original 3/4 HP motor (Model 62D250)
Original mitre guage
Original rip fence
Wrong sized rip fence for spare parts
Original cast iron shoulders/wings
Two sets of Guide bars
Table insert for regular blades
Homemade table insert for dado blades
3 blades:
Freud 8" x 40T Thin Kerf Combination Blade
Freud 8" x 48T Thin Kerf Fine Finish Crosscut Blade (unused)
Concord Blades WCB0825T080HP 8-1/4" 80 Teeth TCT General Purpose Hard & Soft Wood Saw Blade (unused)
PDF Owner’s manual
What’s missing:
Original switch (new paddle switch included)
Belt casing
Blade guard
Not included:
Rolling cart
Jointer details:
Delta-Rockwell Homecraft 4” jointer model #37-110. Serial number BF2165, likely from around 1953/1954.
This jointer has been owned by one family since the original purchase. Cast iron top is solid, no cracks, dead flat. There is some minimal surface rust. This hasn’t been used in some time, but works great. A new blade is likely warranted.
Capacity...... 4" wide
Rabbet..... 1/4" deep
Fence tilts right and left..... 45 degrees
Overall fence dimensions..... 20" x 3"
Adjustable stop at..... 90 degrees
Number of knives in cutterhead..... 3
Table length, overall..... 24 3/8"
Overall dimensions - 8 1/8" high x 28 1/8" long x 9 3/4" wide.
What’s included:
1/2 HP motor (working, but not original)
Original blade guard
Original red ‘Warning’ tag
PDF Owner’s manual
What’s missing:
Original ball end handle (aftermarket handle included)
Pulley wheels & belt
Not included:
Rolling cart |
|
|
|
Seller assumes all responsibility for this listing.
|
|
Seller assumes all responsibility for this listing.
|
|
|