Photo Index - Power King Tool Corp. - 410A

Machinery Photo Index

Manufactured/Badged by:
Power King Tool Corp.
Warsaw, IN

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Shaper, Wood
Machine Size:	5/16" or 1/2"
Submitted By:	Todd Honhart

Machine Specifications
Description/Model:	410A
Date of Manufacturer:	1940's
Serial Number:
Last Updated	3/3/2009 7:57:14 PM

Comments:

I purchased this machine from jj and it was ruckered by Andy Houriet a few weeks ago. This is the only 410A listed in the photo index thus far. It differs from the 411 by the handle locations. The table is only 14" wide and 11" deep. It takes either 5/16" or 1/2" cutters depending on the cutters position on the spindle. I also received the set of 5/16" Delta cutters with the deal. The fence is original and has only been sanded and refinished. Nice little machine, new bearings and it is ready to remount on the homemade stand that came with it. The paint is off the shelf brush-on machinery gray. With a 3450rpm motor you use a 1.5" spindle pulley and a 4" on the motor.

Photo 1:

Comments: front view
Source: me

Direct Link
IMG Code

Photo 2:

Comments: rear of machine,opening differs from 411
Source: me

Direct Link
IMG Code

Photo 3:

Comments: Delta cutter set
Source: me

Direct Link
IMG Code

Photo 4:

Comments: original badges, need some made
Source: me

Direct Link
IMG Code