Photo Index - Yates-American Machine Co., Inc. - G-110 10" Table Saw

Machinery Photo Index

Manufactured/Badged by:
Yates-American Machine Co., Inc.
Beloit, WI; Roscoe, IL; Liberty, NC

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Table Saw
Machine Size:	10"
Submitted By:	Stan Witherspoon

Machine Specifications
Description/Model:	G-110 10" Table Saw
Date of Manufacturer:
Serial Number:
Last Updated	2/3/2009 12:56:17 AM

Comments:

I picked up this oval base Yates-American table saw back in 92 or so from a cabinetmaker in the Sacramento Delta. It has no marking on it other than the big Yates-American badge on the front. Some previous owner spray painted it canary yellow! I cleaned off most of the over spray, remotered it to single phase, figured out how to align and use the sliding fence with the crank, replaced some bad bearings and have been using it for many projects since.

Photo 1:

Comments: The black lever unlatches the fence to slide and latch in any of the holes spaced every inch
Source: My Nikon D70s, Apr, 07

Direct Link
IMG Code

Photo 2:

Comments: Rear view. I added the contacter and electrical box to use the original push buttons
Source: My Nikon D70s, Apr 07

Direct Link
IMG Code

Photo 3:

Comments: I added the white board under the rail. Bumping the white board turns off the saw, The "ON" button is behind the finger hole.
Source: My Nikon D70s Apr 07

Direct Link
IMG Code

Photo 4:

Comments: Type G-110. I have not done any cosmetic restoring other than cleaning off surface rust and overspray
Source: My Nikon D70s, Apr 07

Direct Link
IMG Code

Photo 5:

Comments: one turn of the crank moves both rails 1/16 in. The max travel is ~1 in before you have to move the fence. The aluminum cover and the Allen wrench lever/wire are not original
Source: My Nikon D70s Feb 09

Direct Link
IMG Code

Photo 6:

Comments: Fence Mechanism: The Lever pushes the rod against the spring to unlatch the pin from the rail to release the fence. The crank moves the block in or out and a pin in the bottom of the rail slides in the diag. groove to adjust the rail. Another block moves
Source: my Nikon D70S Feb 09

Direct Link
IMG Code