Photo Index - Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl. - Unisaw

Machinery Photo Index

Manufactured/Badged by:
Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl.
Milwaukee, WI; Jackson, TN; Tupelo, MS

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Table Saw
Machine Size:	10”
Submitted By:	Jim Englert

Machine Specifications
Description/Model:	Unisaw
Date of Manufacturer:	1953
Serial Number:	110-4643
Last Updated	9/3/2023 4:20:30 PM

Comments:

I bought this saw in December of 2021. It was located about 50 miles from my home. The seller was relocating to another region, and didn’t want to move a lot of his machines. This saw has the 1.5hp bullet motor, and is 3ph. The saw was in great condition, bearings were good, and arbor runs true. It has the 72” long rails, and original Delta Micro-set fence. I took off the cast iron top, to change belts, and verify the bearings were good. I cleaned the interior, and repainted it. The exterior needed a few holes filled, but was really in great shape. All the original badges, and ID plates were perfect. I used a TECO Westinghouse L510 inverter, to change my 240v single phase input, to power it back to 3ph. It’s remarkably strong for only 1.5hp. It passed the nickel, and actually penny test for vibration. The BORA mobile base makes it easy to move around in my very cramped workshop.

Photo 1:

Comments: Delta 10” Unisaw
Source: My photo

Direct Link
IMG Code

Photo 2:

Comments: After restoration
Source: My photo

Direct Link
IMG Code

Photo 3:

Comments: Ready for another 70 years.
Source: My photo

Direct Link
IMG Code

Photo 4:

Comments: Working on it in the house
Source: My photo

Direct Link
IMG Code