Photo Index - Hammond Machinery Builders, Inc. - Model 7

Machinery Photo Index

Manufactured/Badged by:
Hammond Machinery Builders, Inc.
Kalamazoo, MI

Machine Specifications
Machine Class:	Metal Working Machinery
Machine Type:	Grinder, Tool and Die
Machine Size:	6” or 7” wheel
Submitted By:	Mike Beam

Machine Specifications
Description/Model:	Model 7
Date of Manufacturer:
Serial Number:	7882
Last Updated	7/4/2022 9:38:41 PM

Comments:

Acquired recently after seeing a similar Model 7 at a recent auction. This version is 110v.

Cast coolant trough sits on top. Drip system will need attention. A catch tray came with the machine and mounts along the side of the stand.

Heavy build, typical of other Hammond products I’ve seen. I own a G100 glider typesetting saw, converted to woodworking.

I’m hoping the use of water will help to eliminate airborne particles in my basement workshop.

Photo 1:

Comments: Front side showing name plate and drum switch. Miter gauge is Hammond but doesn’t fit this grinder’s slot.
Source: IPhone

Direct Link
IMG Code

Photo 2:

Comments: Back side, note trunnion lock on left, right side trunnion lock on reverse (front) side.
Source: iPhone

Direct Link
IMG Code

Photo 3:

Comments: Each table is mounted to a vice-type nut contained within the center cast tube shown in the next picture. Simply unscrew outward facing knob until there’s no more movement, then use a pry bar to move the table assembly out to disengage the inside table.
Source:

Direct Link
IMG Code

Photo 4:

Comments: Under side of center of grinder. Note cast tube to contains tubular shaped acme-threaded nut.
Source:

Direct Link
IMG Code

Photo 5:

Comments: Inside view of table assembly. Note threaded screw end showing inside machined tube. Remnants of CV joint-type boot.
Source:

Direct Link
IMG Code