Photo Index - Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl. - Jointer

Machinery Photo Index

Manufactured/Badged by:
Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl.
Milwaukee, WI; Jackson, TN; Tupelo, MS

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Jointer
Machine Size:	6"
Submitted By:	Mark Hadley

Machine Specifications
Description/Model:	Jointer
Date of Manufacturer:	1948
Serial Number:	67-4054
Last Updated	12/27/2020 10:41:01 PM

Comments:

Local find 2 days before Christmas. Short bed 32" with open stand and old style dust chute. 1/2"hp 1725 motor with original 7" pulley. Homemade rod for off/on. Original belt. On inspection found that the outfeed table had been raised about 1/16" above the blades also the gibs where installed backwards but the knifes were in the right position. I do not think it was used a lot but just enough too mess it up. Also the motor pulley set screw came loose at sometime and spun on the shaft about 2 1/2 times. That made it hard to remove and reposition. Will need new bearings in the head for sure. Knifes need sharpening.

Photo 1:

Comments: side view
Source: my camera

Direct Link
IMG Code

Photo 2:

Comments: side view
Source: my camera

Direct Link
IMG Code

Photo 3:

Comments:
Source: my camera

Direct Link
IMG Code

Photo 4:

Comments:
Source: my camera

Direct Link
IMG Code

Photo 5:

Comments:
Source: my camera

Direct Link
IMG Code

Photo 6:

Comments:
Source: my camera

Direct Link
IMG Code