Photo Index - Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl. - Jointer(No.654) and Tilting Table Saw, combination stand/motor

Machinery Photo Index

Manufactured/Badged by:
Delta Specialty/Delta Mfg. Co./Delta-Rockwell/Rockwell Intl.
Milwaukee, WI; Jackson, TN; Tupelo, MS

Machine Specifications
Machine Class:	Wood Working Machinery
Machine Type:	Combo Machine
Machine Size:	6"/10"
Submitted By:	Paul McClellan

Machine Specifications
Description/Model:	Jointer(No.654) and Tilting Table Saw, combination stand/motor
Date of Manufacturer:	1940's?
Serial Number:
Last Updated	10/16/2004 12:00:00 AM

Comments:

This was a rummage sale acquisition for $150 with heavy, heavy rust. Many thanks to the advice given in your forums and FAQ's concerning restoration.

I'm about mid-progress in the restoration, and may not continue much further as this is a working shop & currently I value economic solvency above aesthetics!

I would very much welcome suggestions to replace the missing blade guard and splitter - do any of you out there have experience with a good source for originals, or for a good modern replacement for a *tiliting-table* TS?

Also, curious to know if the vertical hole outside the fence on the outfeed surface of the jointer is for an accessory, if so what?

Thanks again for the high signal-to-noise ration of this web site!

Best regards,

Paul McClellan

Photo 1:

Comments: both machines on combo stand, mid-way restored.
Source: Paul McClellan

Direct Link
IMG Code

Photo 2:

Comments: Jointer, of course.
Source: Paul McClellan

Direct Link
IMG Code

Photo 3:

Comments: Motor label: any suggestions as to vintage of the motor & stand?
Source: Paul McClellan

Direct Link
IMG Code