|
Title: |
1895 Article-Jones, Lamson & Co., Turret Lathe, Roller Feed & Automatic Chuck |
|
Source: |
Modern Mechanism 1895 pgs 466-467 |
|
Insert Date: |
4/24/2012 10:12:25 AM |
|
Turret-Lathe with Roller-Feed and Automatic Chuck—Fig. 23 shows the revolving roller-feed and automatic chuck, built by the Jones & Lamson Co. for their turret-lathe and screw machines. Fig. 24 shows the turret-lathe with the feed and chuck applied. The operation is as follows: The lever near the head is pulled forward: this opens the chuck, at the same time starting the roller or wire feed, and the stock is rapidly fed up to the stop-gauge; when the lever is thrown back the roller-feed stops, and at the same time the chuck closes firmly upon the stock, and the next operation is ready to be performed. This is done with two strokes of the lever, without the operator leaving his post and without stopping or reversing his machine. |
|
1895 Jones, Lamson & Co., Turret Lathe, Roller Feed & Automatic Chuck
1895 Jones, Lamson & Co., Turret Lathe with Roller Feed & Automatic Chuck
|
|