|
|
|
Seller assumes all responsibility for this listing.
Rare PM cast iron saw extensions....a couple different types...these are the large extensions for the right hand side. One is square on all corners and one is rounded on two corners and square on the other two. Casting numbers TA72 and TA73. These came from a late 70's PM 66 saw with the 28" deep table. Surfaces are very clean with no pits and the original metallic green paint is in good shape. These should work with any model 66, including the original green, gold and mustard colors.
The picture shows the two extensions fastened to the saw that it originally came with.
Asking $395 each or $750 for the pair plus shipping.
I also have three (3) of the oversize steel PM 66 extensions that were painted metallic green (they have surface wear)that allow the same 49' rip capacity to the right of the blade as the two cast iron extensions listed above, approximately 28" x 42" x 2". These would ideally be repainted or powder coated (I have a powder coater who can come close to the original PM metallic green)
Asking $75 each, two (2) for $140 and all three (3) for $200. Additional pictures on request.
I have several of the "standard" 66 saw and 26/27 shaper extension wings, both green and gold. Please inquire if interested. I can ship reasonably via UPS
Finally I have the large cast iron extension for the PM 72, this allows for ripping of 50" to the right of the blade; measures approx. 38" deep x 30" wide. Original metallic green color. Has a little surface oxidation but it is original.
Asking $275 for the extension plus shipping.
I also have some long rails and fences for both the 66 and 72 models. The standard extensions are in various paint colors and conditions.
Can make shipping arrangements for buyer at cost.
Please let me know if interested or if you have questions. |
|
|
|
Seller assumes all responsibility for this listing.
|
|
Seller assumes all responsibility for this listing.
|
|
|