|
Title: |
1903 Article-Miami Valley Machine Tool Co., Patterson Emery Grinder |
|
Source: |
American Blacksmith, V2, Jun 1903, pg. XX |
|
Insert Date: |
10/27/2013 8:40:05 PM |
PATTERSON EMERY GRINDER WITH POLISHING BELT ATTACHMENT.
THE “PATTERSON” EMERY GRINDER which carries 10xl½ inch Emery wheels fitted with a flanged pulley, is shown on this page. Beside it stands a very clever attachment which can be used either with this or any other make of grinding machine. This attachment is fastened to the floor by two lag screws, an endless polishing belt, (shown curled up on the floor) running over the two flanged pulleys, which are 7 inches in diameter and capable of carrying belt 3 inches or less in width. A simple and durable arrangement is provided for tightening and loosening the belt.
The stud on which the flanged pulley revolves is drilled with holes at right angles to each other, the
end tapped out to receive a compression grease cup as s own in the cut. This device insures perfect, clean and economical lubrication. The two pulleys and the attachment weigh 105 pounds. The horizontal adjustment is 7 inches.
This device is manufactured by the Miami Valley Machine Tool Company, Dayton, Ohio, from whom further particulars may be had. |
|
1903 Miami Valley Machine Tool Co., Patterson Emery Grinder
|
|